Commercial Overhead Doors Ottawa
Whether your commercial door application calls for first-rate thermal efficiency, has stringent wind load requirements, or requires a custom oversized door, we have the door for you.
Insulated
Sectional Steel Doors
Made in Canada Steel-Craft Doors, and
The Wayne Dalton Thermospan® Series
WD Model 200-20
WD Model 200
WD Model 150
SC Therm-O-Door
SC Industrial
SC Commercial Flush
Non-Insulated
Sectional Steel Doors
WD Model 2411
SC Aluminum SA6500
SC Aluminum SA7500
Insulated Dock Doors
WD Model 125
Insulated Sectional Steel Doors Thermospan®
Model 200-20
Thermospan® Model 200-20 is the ideal commercial sectional door for energy-conscious architects, engineers, contractors, and building owners. With a U-value* of .057 and R-value* of 17.5, this door outperforms most conventional insulated steel doors.
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corrosion.
KEY PRODUCT FEATURES
Max Width: 24’2”
Max Height: 16’1”
20-gauge exterior steel
Polyurethane insulation, R-value* = 17.5; U-value* = .057
2” section thickness
10,000 cycle standard spring
Patented, roll-formed integral struts for rigidity
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Insulated Sectional Steel Doors Thermospan®
Model 200
Wayne Dalton Thermospan® Model 200 provides premium thermal efficiency and low maintenance costs, resulting in a door that costs less to own. Continuous foamed-in-place polyurethane insulation and a non-conductive thermal break between the inner and outer skins combine to provide a U-value* of .057 and an R-value* of 17.50.
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.
KEY PRODUCT FEATURES
Max Width: 40’2”
Max Height: 32’1”
Polyurethane insulation, R-value* = 17.5, U-value* = .057
2” section thickness
10,000 cycle standard spring
Patented, roll-formed integral struts for rigidity
Embossed stucco exterior with pinstripes
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Insulated Sectional Steel Doors Thermospan®
Model 150
Wayne Dalton’s Thermospan® Model 150 polyurethane-insulated, sectional steel door provides excellent thermal efficiency. Featuring an R-value* of 14.16 (U-value* of .0706), the Thermospan® Model 150 is an excellent value when thermal efficiency is important, but strength, rigidity and durability can’t be compromised.
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.
KEY PRODUCT FEATURES
Max Width: 26’2”
Max Height: 20’1”
Polyurethane insulation, R-value* = 14.16, U-value* = .07
1-1/2” section thickness**
10,000 cycle standard spring
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Steel-Craft THERM-O-DOR®
TD134 and TD138
KEY PRODUCT FEATURES
TD134-20 is exactly the same as the TD134, except it has a 20 Gauge exterior face, and is often requested for heavy duty industrial applications. (only available in white)
• Flexible top seal keeps cold and debris out
• Section weather seals keep wind and cold out
• PVC retainer aids in door rigidity
• Top-quality Canadian galvanized steel is durable and rust resistant
• Two-coat exterior polyester paint finish on inner and outer skin is extremely durable
• Therm-O-Break design reduces cold/heat/moisture conductivity
• Mechanically interlocked front and back skins increase strength
• Continuous steel overlap secures hardware attachments
• Flexible floor seal conforms to minor irregularities to keep out cold and debris
• Insulated windows feature sealed lites and high-impact polymer frames
• Heavy-duty rollers and hardware are durable and make for easy installation
Steel-Craft “SC Industrial”
R value 19 – Commercial/ Industrial Door
KEY PRODUCT FEATURES
– Triple pane sealed windows.
– Available in White, Aluminum, Sable Grey
– Proudly Made in Canada.
Steel-Craft “Commercial Flush”
R16. Modern aesthetic. Excellent performance.
Steel-Craft “Contemporary Industrial”
Form meets function. Sleek plank styling.
Non-Insulated Sectional Steel Doors
Model 2411
Wayne Dalton’s Model 2411 is a strong and visually appealing sectional steel door for moderate commercial applications and is available in a variety of sizes to fit most door openings. This sectional steel door features an embossed exterior skin with a stucco finish to enhance the door’s appearance. C-shaped vertical stiles on the door’s interior provide added strength and allow a quick, secure hinge attachment. It also features end stiles that wrap around the exterior of each section to protect the section face from wear caused by the door jambs.
Model 2411’s exterior ribbing consists of two deep and four shallow ribs in each section, making it ideal for moderate use. The bottom section features a vinyl bulb-shaped astragal, held by a roll-formed, hot-dipped galvanized steel retainer. Optional insulation consists of 1-5/16″ expanded polystyrene which provides an R-value* of up to 7.64 and a U-value as low as 0.13.
KEY PRODUCT FEATURES
Max Width: 20’2”
Max Height: 16’1”
Nominal 24-gauge ribbed steel
Optional polystyrene insulation, R-value* = 7.64
10,000 cycle standard spring
Shiplap joint profile
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
Steel-Craft Aluminum SA6500
Lightweight. Clean look. Max visibility.
KEY PRODUCT FEATURES
FRAMES
– Thickness: 1.8mm (0.071”) to 2.5mm (0.100”); 3.2mm (1/8”) or more at fastener locations.
– Intermediate Stiles: located on interior face only. 1.6mm (0.063”) minimum and 4.8mm (0.189”) at fastener locations. Stile width 76mm (3.0”).
– Top Rail: aluminum strut 38mm (1-1/2”) deep.
INSULATED ALUMINUM PANEL
1.27 mm thick aluminum sheet material insulated and sealed to door frame.
DOOR FACE HARDWARE
– Graduated end hinges and centre hinges made from galvanized steel.
– Heavy duty rollers with heat-treated and outer races with 10 floating ball bearings.
TRACKS
50 mm or 75 mm wide galvanized steel tracks.
WEATHERSTRIPPING
– Bottom weatherstripping: U-type arctic grade vinyl.
– Jamb: quality factory finished metal with two-point flexible arctic grade vinyl weatherstrip.
– Header: quality factory finished metal with two-point flexible arctic grade vinyl weatherstrip.
– Section Interface: arctic grade vinyl bubble shaped weatherstrip at all section meeting rails in integral retainer.
COUNTERBALNCE SYSTEM
– Class II oil tempered ASTM A229 wire, minimum 10,000 cycle torsion springs on continuous steel shaft.
– Aircraft quality galvanized lift cables with a minimum safety factor of 5 to 1.
LOCKING
Interior mounted slide bolt suitable for pad locking.
OPERATION
Manual, Optional Hand chain hoist (3-1 ratio) or optional electric operator.
Steel-Craft Aluminum SA7500
Corrosion-resistant aluminum for years of reliable operation.
KEY PRODUCT FEATURES
FRAMES
– Thickness: 1.8mm (0.071”); 3mm (0.118”) at fastener.
– Top Rail Height: 44mm (1-3/4″).
– Bottom Rail Height: 50mm (2.0”).
– Intermediate Stiles: 60mm (2-3/8”) wide.
– Single End Stiles and Bottom Rail: 99mm (3-15/16”).
– Intermediate Stiles: 60mm (2-3/8”) wide.
ALUMINUM INSERT PANEL
– 13mm (0.051”) thick aluminum sheet material sealed to door frame with glazing compound and held fast with rigid PVC snap in mouldings.
– Available in anodized and painted colours.
– Available in kick-proof design with insulated core.
Insulated Dock Doors
Model 125
Ideal for applications where thermal efficiency is important, and competitive cost is essential, Wayne Dalton’s Thermospan® Model 125 sectional door features a foamed-in-place polyurethane core and standard joint seal that provides a substantially higher thermal efficiency than industry standard polystyrene insulated doors, making Thermospan® Model 125 suitable for commercial and industrial applications.
The Wayne Dalton Thermospan® Series doors are the only sectional doors in the industry with patented, roll-formed integral struts on each section, making them the most rigid doors available. The Thermospan® Series also has a patented manufacturing process with a polyurethane core that is continuously foamed-in-place between the outer and inner skins. An innovative thermal break keeps the interior skin at room temperature, preventing condensation and frost and helping to resist corruption.
KEY PRODUCT FEATURES
Max Width: 16’2”
Max Height: 16’1”
Polyurethane insulation, R-value*=10.79; U-value* = .093
7/8” section thickness
10,000 cycle standard spring
Patented, roll-formed integral struts for rigidity
*Wayne Dalton uses a calculated door section R-value and U-value for insulated doors.
